AWLGRIP COLD CURE ACCELERATOR FOR 545Accelerator for use with 545 Epoxy Primers applied at low temperatures. 545 Primer cure times are reduced by as much as 50%. One pint of M3066 Cold Cure is the maximum amount that can be used to accelerate one gallon of catalyzed 545 Primer. The amount of T0006 Reducer required for application can be decreased by up to one pint per catalyzed gallon when M3066 Cold Cure has been added. Use between 50F and 75F. Product is sold by the pint.
APPLICATION INSTRUCTIONS: Mix 1 part by volume 545 Primer base with 1 part D3001 converter. Thoroughly mix the primer and allow the mixture to induct for 15 minutes. Remix after induction. Add COLD CURE to a maximum quantity of 12.5% by volume. Total mix volume is 1:1:1/4.
Reduction for Spray Application: Use the T0006 Reducer for additional reduction. 545 Primer is normally reduced 25% by volume. If the maximum quantity of COLD CURE is used, 1/4 part of T0006 is added to reach 25% reduction. Total mix by volume is: 1 part 545 Base : 1 part D3001 : 1/4 part M3006 : 1/4 part T0006. Example: 8 oz. 545 Base : 8 oz. D3001 : 2 oz. M3066 : 2 oz. T0006.
Reduction for Brush Application: Additional reduction may not be needed after the addition of COLD CURE. If additional reduction is needed, use T0031 Brushing Reducer. The combined total of the M3066 and T0031 should not exceed 20% of the mixed base and converter. Example: 8 oz. 545 Base : 8 oz. D3001 : 2 oz. M3066 : 1 oz. T0031.
WARNING: COLD CURE may considerably shorten the pot life of 545 Primer.
SHIPPING NOTE:Product is considered hazardous if shipping by air.
LINKS:
Awlgrip Cold Cure M3066 AcceleratorTDS
Awlgrip Cold Cure M3066 AcceleratorSDS
